Solid wood is sensitive to changes in moisture content and it will grow and shrink according to the length than width. If you move the table from the rain forest (humid air), desert (dry air), it contracts. If you move from desert to rainforest, which grows in size.
I did a lot of tables in my life and I soon learned that it is highly desirable to lay down a solid wood table set the table apron. The wood moves over timeand if the movement is important, it will cut up the apron and the table. Therefore, I make all my tables with the nut slot in the top inside of the skirt all around. I then finished wooden clips that attach to the top of the ramp. The clips are screwed to the bottom of the above. A "finger" is made by cutting away part of the clip at one end. This "finger" is how some nut in the period prior to being loaded bolted to the table.
Since the holesClips vary slightly from one clip to another position, I have the habit of marking clip in numerical order with a marker. I sign the same number under the table top where it can be the subject of the clip. In this way, the above removed for repair and was replaced by all the holes line with the clip.
Movement in solid wood table tops can also take the form of notes or cupping seen. 1 1 / 2 "x 2" cross bars can be stored on wheat, under theTip. They should be mounted with screws # 14 rounds of brass (brass with washers) screwed into the bottom of the table. The holes through the cross bars have a slot to allow the movement of wood .. They never cross braces affixed to the table to restrict the freedom of natural top. Three beams should be sufficient for the average dining table, a table for two. The beams can be easily removed and replaced to finish a table.
No comments:
Post a Comment